Tag Archives: duplex chain

China OEM Chain Manufacturer 28A-2 a Series Short Pitch Precision Duplex Mechanical Industrial & Agricultural Driving Chains and Bush Chains for Forklift &Car Parking

Product Description

A Series Short Pitch Precision Duplex Roller Chains & Bush Chains

ISO/ANSI/ DIN
Chain No.
Chain No. Pitch

P
mm

Roller diameter

d1max
mm

Width between inner plates
b1min
mm
Pin diameter

d2max
mm

Pin length Inner plate depth
h2max
mm
Plate thickness

Tmax
mm

Transverse                     Pt 
mm
Tensile strength

Qmin
kN/lbf

Average tensile strength
Q0
kN
Weight per meter
q  
kg/m
Lmax
mm
Lcmax
mm
140-2 28A-2 44.450 25.40 25.22 12.70 103.3 107.9 41.00 5.60 48.87 344.80/78364 445.0 15.14

*Bush chain: d1 in the table indicates the external diameter of the bush

ROLLER CHAIN

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.

CONSTRUCTION OF THE CHAIN

Two different sizes of roller chain, showing construction.
There are 2 types of links alternating in the bush roller chain. The first type is inner links, having 2 inner plates held together by 2 sleeves or bushings CHINAMFG which rotate 2 rollers. Inner links alternate with the second type, the outer links, consisting of 2 outer plates held together by pins passing through the bushings of the inner links. The “bushingless” roller chain is similar in operation though not in construction; instead of separate bushings or sleeves holding the inner plates together, the plate has a tube stamped into it protruding from the hole which serves the same purpose. This has the advantage of removing 1 step in assembly of the chain.

The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. The original power transmission chain varieties lacked rollers and bushings, with both the inner and outer plates held by pins which directly contacted the sprocket teeth; however this configuration exhibited extremely rapid wear of both the sprocket teeth, and the plates where they pivoted on the pins. This problem was partially solved by the development of bushed chains, with the pins holding the outer plates passing through bushings or sleeves connecting the inner plates. This distributed the wear over a greater area; however the teeth of the sprockets still wore more rapidly than is desirable, from the sliding friction against the bushings. The addition of rollers surrounding the bushing sleeves of the chain and provided rolling contact with the teeth of the sprockets resulting in excellent resistance to wear of both sprockets and chain as well. There is even very low friction, as long as the chain is sufficiently lubricated. Continuous, clean, lubrication of roller chains is of primary importance for efficient operation as well as correct tensioning.

LUBRICATION

Many driving chains (for example, in factory equipment, or driving a camshaft inside an internal combustion engine) operate in clean environments, and thus the wearing surfaces (that is, the pins and bushings) are safe from precipitation and airborne grit, many even in a sealed environment such as an oil bath. Some roller chains are designed to have o-rings built into the space between the outside link plate and the inside roller link plates. Chain manufacturers began to include this feature in 1971 after the application was invented by Joseph Montano while working for Whitney Chain of Hartford, Connecticut. O-rings were included as a way to improve lubrication to the links of power transmission chains, a service that is vitally important to extending their working life. These rubber fixtures form a barrier that holds factory applied lubricating grease inside the pin and bushing wear areas. Further, the rubber o-rings prevent dirt and other contaminants from entering inside the chain linkages, where such particles would otherwise cause significant wear.[citation needed]

There are also many chains that have to operate in dirty conditions, and for size or operational reasons cannot be sealed. Examples include chains on farm equipment, bicycles, and chain saws. These chains will necessarily have relatively high rates of wear, particularly when the operators are prepared to accept more friction, less efficiency, more noise and more frequent replacement as they neglect lubrication and adjustment.

Many oil-based lubricants attract dirt and other particles, eventually forming an CHINAMFG paste that will compound wear on chains. This problem can be circumvented by use of a “dry” PTFE spray, which forms a solid film after application and repels both particles and moisture.

VARIANTS DESIGN

Layout of a roller chain: 1. Outer plate, 2. Inner plate, 3. Pin, 4. Bushing, 5. Roller
If the chain is not being used for a high wear application (for instance if it is just transmitting motion from a hand-operated lever to a control shaft on a machine, or a sliding door on an oven), then 1 of the simpler types of chain may still be used. Conversely, where extra strength but the smooth drive of a smaller pitch is required, the chain may be “siamesed”; instead of just 2 rows of plates on the outer sides of the chain, there may be 3 (“duplex”), 4 (“triplex”), or more rows of plates running parallel, with bushings and rollers between each adjacent pair, and the same number of rows of teeth running in parallel on the sprockets to match. Timing chains on automotive engines, for example, typically have multiple rows of plates called strands.

Roller chain is made in several sizes, the most common American National Standards Institute (ANSI) standards being 40, 50, 60, and 80. The first digit(s) indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch would be a #40 while a #160 sprocket would have teeth spaced 2 inches apart, etc. Metric pitches are expressed in sixteenths of an inch; thus a metric #8 chain (08B-1) would be equivalent to an ANSI #40. Most roller chain is made from plain carbon or alloy steel, but stainless steel is used in food processing machinery or other places where lubrication is a problem, and nylon or brass are occasionally seen for the same reason.

Roller chain is ordinarily hooked up using a master link (also known as a connecting link), which typically has 1 pin held by a horseshoe clip rather than friction fit, allowing it to be inserted or removed with simple tools. Chain with a removable link or pin is also known as cottered chain, which allows the length of the chain to be adjusted. Half links (also known as offsets) are available and are used to increase the length of the chain by a single roller. Riveted roller chain has the master link (also known as a connecting link) “riveted” or mashed on the ends. These pins are made to be durable and are not removable.

USE

An example of 2 ‘ghost’ sprockets tensioning a triplex roller chain system
Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute; however, at higher speeds, around 2,000 to 3,000 feet per minute, V-belts are normally used due to wear and noise issues.
A bicycle chain is a form of roller chain. Bicycle chains may have a master link, or may require a chain tool for removal and installation. A similar but larger and thus stronger chain is used on most motorcycles although it is sometimes replaced by either a toothed belt or a shaft drive, which offer lower noise level and fewer maintenance requirements.
The great majority of automobile engines use roller chains to drive the camshaft(s). Very high performance engines often use gear drive, and starting in the early 1960s toothed belts were used by some manufacturers.
Chains are also used in forklifts using hydraulic rams as a pulley to raise and lower the carriage; however, these chains are not considered roller chains, but are classified as lift or leaf chains.
Chainsaw cutting chains superficially resemble roller chains but are more closely related to leaf chains. They are driven by projecting drive links which also serve to locate the chain CHINAMFG the bar.

Sea Harrier FA.2 ZA195 front (cold) vector thrust nozzle – the nozzle is rotated by a chain drive from an air motor
A perhaps unusual use of a pair of motorcycle chains is in the Harrier Jump Jet, where a chain drive from an air motor is used to rotate the movable engine nozzles, allowing them to be pointed downwards for hovering flight, or to the rear for normal CHINAMFG flight, a system known as Thrust vectoring.

WEAR

 

The effect of wear on a roller chain is to increase the pitch (spacing of the links), causing the chain to grow longer. Note that this is due to wear at the pivoting pins and bushes, not from actual stretching of the metal (as does happen to some flexible steel components such as the hand-brake cable of a motor vehicle).

With modern chains it is unusual for a chain (other than that of a bicycle) to wear until it breaks, since a worn chain leads to the rapid onset of wear on the teeth of the sprockets, with ultimate failure being the loss of all the teeth on the sprocket. The sprockets (in particular the smaller of the two) suffer a grinding motion that puts a characteristic hook shape into the driven face of the teeth. (This effect is made worse by a chain improperly tensioned, but is unavoidable no matter what care is taken). The worn teeth (and chain) no longer provides smooth transmission of power and this may become evident from the noise, the vibration or (in car engines using a timing chain) the variation in ignition timing seen with a timing light. Both sprockets and chain should be replaced in these cases, since a new chain on worn sprockets will not last long. However, in less severe cases it may be possible to save the larger of the 2 sprockets, since it is always the smaller 1 that suffers the most wear. Only in very light-weight applications such as a bicycle, or in extreme cases of improper tension, will the chain normally jump off the sprockets.

The lengthening due to wear of a chain is calculated by the following formula:

M = the length of a number of links measured

S = the number of links measured

P = Pitch

In industry, it is usual to monitor the movement of the chain tensioner (whether manual or automatic) or the exact length of a drive chain (one rule of thumb is to replace a roller chain which has elongated 3% on an adjustable drive or 1.5% on a fixed-center drive). A simpler method, particularly suitable for the cycle or motorcycle user, is to attempt to pull the chain away from the larger of the 2 sprockets, whilst ensuring the chain is taut. Any significant movement (e.g. making it possible to see through a gap) probably indicates a chain worn up to and beyond the limit. Sprocket damage will result if the problem is ignored. Sprocket wear cancels this effect, and may mask chain wear.

CHAIN STRENGTH

The most common measure of roller chain’s strength is tensile strength. Tensile strength represents how much load a chain can withstand under a one-time load before breaking. Just as important as tensile strength is a chain’s fatigue strength. The critical factors in a chain’s fatigue strength is the quality of steel used to manufacture the chain, the heat treatment of the chain components, the quality of the pitch hole fabrication of the linkplates, and the type of shot plus the intensity of shot peen coverage on the linkplates. Other factors can include the thickness of the linkplates and the design (contour) of the linkplates. The rule of thumb for roller chain operating on a continuous drive is for the chain load to not exceed a mere 1/6 or 1/9 of the chain’s tensile strength, depending on the type of master links used (press-fit vs. slip-fit)[citation needed]. Roller chains operating on a continuous drive beyond these thresholds can and typically do fail prematurely via linkplate fatigue failure.

The standard minimum ultimate strength of the ANSI 29.1 steel chain is 12,500 x (pitch, in inches)2. X-ring and O-Ring chains greatly decrease wear by means of internal lubricants, increasing chain life. The internal lubrication is inserted by means of a vacuum when riveting the chain together.

CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Alloy
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1045, Stainless Steel , Q235, Brass
Structure: Roller Chain
Samples:
US$ 0/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

mechanical

How to troubleshoot chain skipping or slipping issues?

Chain skipping or slipping can occur in mechanical chain systems and can lead to performance issues and potential safety hazards. Here are some steps to troubleshoot and address these problems:

  1. Check chain tension: Improper chain tension can cause skipping or slipping. Ensure the chain is properly tensioned according to the manufacturer’s specifications. If the chain is too loose, adjust the tension to the recommended level.
  2. Inspect sprockets: Worn or damaged sprockets can cause chain skipping. Inspect the sprockets for signs of wear, such as worn teeth or grooves. Replace any damaged or worn-out sprockets to ensure proper engagement with the chain.
  3. Examine chain wear: Excessive chain wear can lead to poor engagement with the sprockets, resulting in skipping. Measure the chain for elongation using a chain wear gauge. If the chain is significantly elongated beyond the manufacturer’s specifications, it may need to be replaced.
  4. Inspect chain lubrication: Insufficient lubrication can increase friction and cause the chain to skip or slip. Ensure the chain is adequately lubricated according to the manufacturer’s recommendations. Apply the appropriate lubricant to all chain links and ensure even distribution.
  5. Check for debris or foreign objects: Foreign objects or debris lodged between the chain and sprockets can disrupt the chain’s engagement and cause skipping. Inspect the chain and sprockets for any debris, such as dirt, dust, or trapped objects. Clean the chain and sprockets thoroughly to remove any obstructions.
  6. Inspect chain condition: Damaged or worn-out chain components, such as bent or twisted links, can contribute to skipping. Carefully examine the chain for any visible damage or deformities. If any components are damaged, replace them with new ones.
  7. Ensure proper alignment: Misalignment between the chain and sprockets can lead to skipping. Check the alignment of the sprockets and make adjustments if necessary. Proper alignment will ensure the chain engages smoothly and securely.
  8. Consider upgrading the chain: If skipping or slipping issues persist despite troubleshooting steps, it may be necessary to upgrade to a higher-quality or more suitable chain for the specific application. Consult with experts or the chain manufacturer for recommendations.

By following these troubleshooting steps, it is possible to identify and address the underlying causes of chain skipping or slipping issues. Regular inspection, proper maintenance, and adherence to manufacturer guidelines are crucial in ensuring the smooth and reliable operation of mechanical chains.

mechanical

How does a mechanical chain compare to other types of power transmission systems?

When comparing mechanical chains to other types of power transmission systems, it’s important to consider factors such as efficiency, load capacity, speed, cost, maintenance requirements, and application suitability. Here is a detailed comparison:

Aspect Mechanical Chain Comparison
Efficiency A properly lubricated mechanical chain can offer high efficiency, typically ranging from 90-98%. However, efficiency can decrease with wear and improper maintenance. Efficient power transfer, but can be affected by wear and maintenance.
Load Capacity Mechanical chains are known for their high load capacity and ability to handle heavy loads and high torque requirements. Excellent load-carrying capabilities.
Speed Mechanical chains can operate at high speeds, but their performance may be limited compared to other systems like gears or belts in certain high-speed applications. Suitable for a wide range of speeds but may have limitations in very high-speed applications.
Cost Mechanical chains are generally cost-effective compared to some other power transmission systems, especially for heavy-duty applications. Relatively cost-effective.
Maintenance Mechanical chains require regular lubrication and periodic maintenance to ensure optimal performance and longevity. They may also require tension adjustment and occasional replacement due to wear. Moderate maintenance requirements.
Application Suitability Mechanical chains are widely used in various industries and applications, including automotive, industrial machinery, agricultural equipment, and more. They are suitable for transmitting power in straight or slightly curved paths. Versatile and suitable for a wide range of applications.

In summary, mechanical chains offer high load capacity, efficiency, and versatility, making them suitable for many industrial applications. However, they require regular maintenance and may have limitations in extremely high-speed applications. The choice between mechanical chains and other power transmission systems depends on specific application requirements, such as load capacity, speed, cost, and environmental conditions.

It is always recommended to consult with industry experts or engineers to determine the most suitable power transmission system for a particular application based on its specific requirements.

China OEM Chain Manufacturer 28A-2 a Series Short Pitch Precision Duplex Mechanical Industrial & Agricultural Driving Chains and Bush Chains for Forklift &Car Parking  China OEM Chain Manufacturer 28A-2 a Series Short Pitch Precision Duplex Mechanical Industrial & Agricultural Driving Chains and Bush Chains for Forklift &Car Parking
editor by CX 2024-05-09

China supplier Transmitting Mechanical Power Automobile CZPT Davidson Duplex Plastic Roller Cleaner Chainsaw Bike Chainsaw Chain Pump Bicycle Bike Drive Chain

Product Description

Transmitting Mechanical Power Automobile CHINAMFG Davidson Duplex Plastic Roller Cleaner Chainsaw Bike Chainsaw Chain Pump Bicycle Bike Drive Chain

Product Description

 

A bike drive chain is a simple and efficient mechanism used to transfer power from the pedals to the rear wheel of a bicycle. The bike chain consists of a series of interlocking metal links that are designed to mesh with the teeth of the front and rear sprockets. When the pedals are turned, the bike chain rotates around the sprockets, causing the rear wheel to turn and propel the bicycle forward. Here are some key features and benefits of bike drive chains:

1. Durable: Bike drive chains are designed to be durable and long-lasting, withstanding the stresses and strains of regular use. They are made of high-quality metal alloys, such as steel or nickel-plated steel, that are resistant to rust and corrosion.

2. Efficient: Bike drive chains are an efficient means of transferring power from the pedals to the rear wheel of a bicycle. They have low frictional losses, meaning that less energy is lost during the power transfer process, resulting in a more efficient ride.

3. Easy to maintain: Bike drive chains are relatively easy to maintain, requiring regular cleaning and lubrication to keep them in good working order. Proper maintenance allows a bike chain to last for thousands of HangZhous of riding.

4. Versatile: Bike drive chains are available in various sizes and configurations that can be tailored to meet the specific needs of different types of bicycles and riding styles. They can also be easily replaced or upgraded, allowing riders to customize their bikes for optimal performance.

5. Lightweight: Bike drive chains are lightweight, which helps to reduce the overall weight of the bicycle. This can make the bike easier to handle and maneuver, particularly when riding uphill or over rough terrain.

6. Cost-effective: Bike drive chains are a cost-effective component of a bicycle drivetrain. Compared to other drivetrain components such as cassettes or derailleurs, they are relatively inexpensive to replace.

In summary, the bike drive chain is an essential component of a bicycle drivetrain, transferring power from the pedals to the rear wheel to propel the bike forward. Bike chains are durable, efficient, easy to maintain, versatile, lightweight, and cost-effective, making them popular for cyclists of all levels and riding styles.

Model Table of Chain

Transmission chain (Driving Chain)

Short Pitch Precision Roller Chain (A Series)(1,2,3)

04C-1 06C-1-2-3 085-1-2-3 08A-1-2-3 10A-1-2-3 12A-1-2-3 16A-1-2-3 20A-1-2-3 24A-1-2-3 28A-1-2-3 32A-1-2-3 40A-1-2-3 48A-1-2-3

-2 35-3 -2 40-3 50 50-2-50-3 60 60-2 60-3 80 80-2 80-3 100 100-2 100-3 120 120-2 120-3 140 140-2 160 160-2 180 200
200-2 240

Short Pitch Precision Roller Chain (B Series)(1,2,3)

06B-1-2-3 06B-1-2-3 08B-1-2-3 10B-1-2-3 12B-1-2-3 16B-1-2-3 20B-1-2-3 24B-1-2-3 28B-1-2-3 32B-1-2-3 40B-1-2-3 48B-1-2-3 56B-1-2-3
64B-1-2-3 72B-1-2-3

Heavy Duty Series Roller Chain(1,2)

08AH-1 10AH-1 12AH-1-2-3 16AH-1-2-3 20AH-1-2-3 24AH-1-2-3 28AH-1-2-3 32AH-1-2-3 40AH-1-2-3

Side Bow Chain

40SB 43SB 50SB 60SB 63SB 80SB 08BSB 08BSBY1 10BSB 12BSB C2050SB

Motorcycle Chain

H 420 420H 428 428H 520 520H 525 525H 530 530H 630 630H

Engine Mechanism Chain (Timing Chain)

CL04

Self-Lubrication Roller Chain

08BSLR 10BSLR 12BSLR 16BSLR 40SLR 50SLR 60SLR 80SLR

Double Pitch Transmission Chain

208A 208B 210A 210B 212A 212B 216A 216B 220A 220B

2100

Bush Chain

P15F-B P20-B P25-B P25F1-B P30F2-B P36-B P40-B P45-B P50-B P55-B P60-B P70-B P80-B

Conveyor Chain

Roller Chain With Straight Side Plates (A Series)

C08A-1-2-3 C10A-1-2-3 C12-1-2-3 C24A-1-2-3 C32A-1-2-3

C35 C40-1-2-3 C50-1-2-3 C80-1-2-3 C100-1-2-3 C120-1-2-3 C140-1-2-3 C160-1-2-3

Roller Chain With Straight Side Plates (B Series)

C08B-1-2-3 C10B-1-2-3 C12B-1-2-3 C16-1-2-3 C20B-1-2-3 C24B-1-2-3 C28B-1-2-3 C32B-1-2-3

Double Pitch Conveyor Chain

C208A C208AH C208B C208BL C210A C210AL C212A C212AH C212AHL C216A C216AL C216AH C216AHL C220A C220AL C220AH C220AHL C224A C224AL
C224AH C224AHL C232A C232AL C232AH C232AHL

C2050 C2052 C2060 C2062 C2060H C2080 C2080H C2082 C2082H C2100 C2100H C2102 C2102H C2120 C2120H C2122 C2122H C2160 C2160H C2162
C2162H

Double Pius Speed Chain

BS25-C206B BS25-C208A BS25-C210A BS25-C212A BS30-C206B BS30-C208B BS30-C210B BS30-C212B

Conveyor Chain (M Series)

M20 M28 M40 M56 M80

Hollow Pin Conveyor Chain (MC Series)

MC28 MC56 MC112 MC224

Conveyor Chain (FV Series)

FV40 FV63 FV90 FV112 FV140

Conveyor Chain (FVT Series)

FVT40 FVT63 FVT90 FVT112 FVT140 FVT180 FVT250 FVT315

Hollow Pin Conveyor Chain (FVC Series)

FVC63 FVC90 FVC112 FVC140 FVC180 FVC250 FVC315

Conveyor Chain (Z Series)

Z40 Z100 Z160 Z300

Conveyor Chain (ZE Series)

ZE40 ZE100 ZE160 ZE300

Hollow Pin Conveyor Chain (ZC Series)

ZC21 ZC40 ZC60 ZC150 ZC300

Hollow Pin Chains

08BHPF 08BHPF5 08BHP9 10BHPF3 10BHPF4 12BHPF2 12BHPF3 16BHPF3 16BHPF4 40HP 08BHPF7 08BHP 50HP 50HPF4 50H-HP 60HP 60HPF1 80HP
80HPF1 80HPF2 80H-HP 80HPF3 80HPF4 HB41.75F5 A2080HP

Welded type cranked link chains

WR78 WH78 WR82 WH82 WR106 WH106 WR110 WH110 WR111 WH111 WR124 WH124 WR132 WH132 WR150 WH150 WR155 WH155 WR157 WH157 WR78F5 WH78F4
WH124F1 WH111F1

Palm oil Chains

P101.6F2 P152F14 P152F17 P152F29 90R-S P101.6F64 P76.7 P152F31

Sugar mill chains

DH9063 DH2198 P152F93K2 P152F78K2 DH 0571 0 DH1796 P152F77-AS2 P203.2F9

Rubber gloves carrier chains

P100F155 P100F13 P100F139 P150/90

Lumber conveyor chains

81X 81XH 81XHE 81XHH 81XHS 500R 441.100R

Sharp top chains

08AF34 08BF21 10AF8 41F6 06BF1 06BF37 08AF41 08BF44 08AF8…

Stainless Steel Chain

Stainless Steel Short Pitch Precision Roller Chain(A Series)

25SS-1 35SS-1 41SS-1 40SS-1 50SS-1 60SS-1 80SS-1 100SS-1 120SS-1

Stainless Steel Short Pitch Precision Roller Chain(B Series)

05BSS-1 06BSS-1 08BSS-1 10BSS-1 12BSS-1 16BSS-1 20BSS-1 24BSS-1

Stainless Steel Roller Chain With Straight Side Plates

C40SS-1 C50SS-1 C60SS-1 C80SS-1 C100SS-1 C120SS-1 C08BSS-1 C10BSS-1 C12BSS-1 C16BSS-1 C20BSS-1 C24BSS-1

Stainless Steel Double Pitch Transmission Chain

2040SS 2050SS 2060SS 2080SS 2100SS 2120SS 208BSS 210BSS 212BSS 216BSS 220BSS 224BSS

Stainless Steel Double Pitch Conveyor Chain

C2040SS C2040HSS C208BSS C2050SS C2060SS C2060HSS C2080SS C2080HSS C2100SS C2100HSS C2120SS C2120HSS

Stainless Steel Hollow Pin Chain

08BHFSS 40HPSS 50HPSS 60HPSS 12BHPSS 80HPSS C2040HPSS C2050HPSS C2060HPSS C2080HPSS HB50.8SS

Stainless Steel Double Pitch Hollow Pin Chain

C2042HPSS C2052HPSS C2062HPSS C2082HPSS C2042H-HPSS C2052H-HPSS C2062H-HPSS C2082H-HPSS

Lifting Chain

Car Parking Chain

12AT-1 16AT-1-2 20AT-1-2-3 24AT-1-2

Leaf Chain

LH0822 LH0823 LH571 LH0844 LH0846 LH 0571 LH1571 LH1571 LH1034 LH1044 LH1046 LH1066 LH1088 LH1222 LH1223 LH1234 LH1244 LH1246
LH1266 LH1288

BL422 BL423 BL434 BL444 BL446 BL466 BL488 BL522 BL523 BL534 BL544 BL546 BL566 BL588 BL622 BL623 BL634 BL644 BL646 BL666 BL688

Multile Plate Bearing Pin Chain

LF30 MP50F2 MP50.8 MP70F1 MP70F2 MP70F3 MP80F1 MP90F1 MP90F2 MP110F1

Rollerless Lift Chain

45-1 55-1 65-1 85-1 105-1 125-1 145-1 165-1

Agricultural Chain

S Type Steel Agricultural Chain & Attachments

S32 S42 S45 S52 S55 S62 S77 S88 A550 A620

C Type Steel Agricultural Chain with Attachments

CA550 CA550/S55 CA555 CA550HD CA550V CA557 CA620 CA2801 38.1R 38.4R 38.4V 38.4VB

Rice Harvester Chain

S3558T-48001 S3558T-48002

Drop Forged Chain Series

Drop Forged Rivetless Chain

Imperial: 80H X348 X458 468H X658 X 9118 S348 S458 S678 S698 S9118, Metric system: XT100 XT160

Cast Detachable Chain

78

Steel Detachable Chain

W

Cast Iron Chain

Cast Iron Chain (C Series)

C55 C55L C77 C188 C188L C102B C111 C131 C132

Cast Iron Chain (H Series)

H60 H78 H82 H110

Cast Iron Chain (4 Series)

720 720S 730

Cast Iron Chain BRH188

BRH188 C188CP C102B-K2 C55A C55B C55D CC600 H78A H78B H130 H138 MCF29 907-E51

Welded chains

WR78 WH78 WR82 WH82 WR124 WH124

Forging Hanging Chain

X228 X348 X458 X678 698

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Iron
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

mechanical

What are the benefits of using stainless steel mechanical chains?

Stainless steel mechanical chains offer several advantages in various applications where corrosion resistance and durability are essential. Here are some of the key benefits:

  • Corrosion resistance: Stainless steel chains are highly resistant to corrosion, making them ideal for applications exposed to moisture, chemicals, or harsh environments. They can withstand rust, oxidation, and chemical reactions better than standard steel chains, ensuring longer service life and reliable performance.
  • High strength: Stainless steel chains retain their strength even in challenging conditions. They have excellent tensile strength, allowing them to withstand heavy loads and high-stress environments without compromising performance or safety.
  • Hygienic properties: Stainless steel chains are easy to clean and maintain, making them suitable for industries with strict hygiene requirements, such as food processing, pharmaceuticals, and medical devices. The smooth surface of stainless steel prevents the accumulation of contaminants and facilitates thorough cleaning, reducing the risk of contamination.
  • Temperature resistance: Stainless steel chains exhibit good resistance to high and low temperatures, making them suitable for applications that involve extreme temperature variations. They can maintain their mechanical properties and performance even in environments with elevated or sub-zero temperatures.
  • Longevity and durability: Stainless steel chains have a longer lifespan compared to standard steel chains due to their corrosion resistance and robust construction. They require less frequent replacement, resulting in cost savings and reduced downtime.
  • Versatility: Stainless steel chains are available in various configurations and sizes to accommodate different application requirements. They can be found in a wide range of industries, including food processing, chemical processing, marine, pharmaceuticals, and more.
  • Aesthetic appeal: Stainless steel chains have a visually appealing appearance and are often chosen for applications where aesthetics are important, such as architectural designs or decorative installations.

Overall, the use of stainless steel mechanical chains provides enhanced performance, longevity, and resistance to corrosion, making them a reliable choice in demanding environments where traditional chains may not withstand the conditions. It is important to select the appropriate grade of stainless steel based on the specific application requirements to fully leverage these benefits.

mechanical

Can a mechanical chain be used for vertical lifting applications?

Yes, a mechanical chain can be used for vertical lifting applications in certain circumstances. However, it is essential to consider several factors to ensure safe and efficient lifting operations. Here are some detailed explanations:

A mechanical chain used for vertical lifting is typically referred to as a “lifting chain” or “hoisting chain.” Lifting chains are designed and manufactured to meet specific safety standards and regulations to ensure their suitability for lifting applications.

When considering the use of a mechanical chain for vertical lifting, the following factors should be considered:

  • Chain Design and Strength: Lifting chains are specially designed and constructed to withstand the stresses and forces involved in lifting operations. They are typically made from high-strength alloy steel and feature specific chain configurations, such as grade, pitch, and diameter, to provide the necessary load-bearing capacity.
  • Load Capacity and Working Load Limit (WLL): It is crucial to select a lifting chain with an appropriate load capacity for the intended lifting application. The working load limit (WLL) specifies the maximum load that the chain can safely lift under normal operating conditions. Exceeding the WLL can result in chain failure and potential accidents.
  • Attachments and End Fittings: Lifting chains often incorporate end fittings or attachments, such as hooks, shackles, or master links, to facilitate connection to the load and lifting equipment. These attachments should be selected and used in accordance with applicable safety standards and guidelines.
  • Safety Factors and Regulations: Lifting operations involving mechanical chains are subject to various safety regulations and standards, such as those set by occupational safety organizations and government authorities. These regulations specify requirements for equipment selection, inspection, maintenance, and safe operating practices. It is important to adhere to these regulations to ensure the safety of personnel and proper lifting operations.
  • Inspection and Maintenance: Regular inspection and maintenance of the lifting chain are essential to ensure its continued safe and reliable operation. Visual inspections, load testing, and verification of compliance with safety standards should be performed at regular intervals by qualified personnel.

It is crucial to consult with qualified professionals and adhere to applicable regulations and guidelines when using a mechanical chain for vertical lifting applications. They can provide specific guidance based on the requirements of the lifting task, ensuring the selection and safe use of the appropriate lifting chain.

China supplier Transmitting Mechanical Power Automobile CZPT Davidson Duplex Plastic Roller Cleaner Chainsaw Bike Chainsaw Chain Pump Bicycle Bike Drive Chain  China supplier Transmitting Mechanical Power Automobile CZPT Davidson Duplex Plastic Roller Cleaner Chainsaw Bike Chainsaw Chain Pump Bicycle Bike Drive Chain
editor by CX 2024-04-17

China supplier Chain Manufacturer 28A-2 a Series Short Pitch Precision Duplex Mechanical Industrial & Agricultural Driving Chains and Bush Chains for Forklift &Car Parking

Product Description

A Series Short Pitch Precision Duplex Roller Chains & Bush Chains

ISO/ANSI/ DIN
Chain No.
Chain No. Pitch

P
mm

Roller diameter

d1max
mm

Width between inner plates
b1min
mm
Pin diameter

d2max
mm

Pin length Inner plate depth
h2max
mm
Plate thickness

Tmax
mm

Transverse                     Pt 
mm
Tensile strength

Qmin
kN/lbf

Average tensile strength
Q0
kN
Weight per meter
q  
kg/m
Lmax
mm
Lcmax
mm
140-2 28A-2 44.450 25.40 25.22 12.70 103.3 107.9 41.00 5.60 48.87 344.80/78364 445.0 15.14

*Bush chain: d1 in the table indicates the external diameter of the bush

ROLLER CHAIN

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.

CONSTRUCTION OF THE CHAIN

Two different sizes of roller chain, showing construction.
There are 2 types of links alternating in the bush roller chain. The first type is inner links, having 2 inner plates held together by 2 sleeves or bushings CHINAMFG which rotate 2 rollers. Inner links alternate with the second type, the outer links, consisting of 2 outer plates held together by pins passing through the bushings of the inner links. The “bushingless” roller chain is similar in operation though not in construction; instead of separate bushings or sleeves holding the inner plates together, the plate has a tube stamped into it protruding from the hole which serves the same purpose. This has the advantage of removing 1 step in assembly of the chain.

The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. The original power transmission chain varieties lacked rollers and bushings, with both the inner and outer plates held by pins which directly contacted the sprocket teeth; however this configuration exhibited extremely rapid wear of both the sprocket teeth, and the plates where they pivoted on the pins. This problem was partially solved by the development of bushed chains, with the pins holding the outer plates passing through bushings or sleeves connecting the inner plates. This distributed the wear over a greater area; however the teeth of the sprockets still wore more rapidly than is desirable, from the sliding friction against the bushings. The addition of rollers surrounding the bushing sleeves of the chain and provided rolling contact with the teeth of the sprockets resulting in excellent resistance to wear of both sprockets and chain as well. There is even very low friction, as long as the chain is sufficiently lubricated. Continuous, clean, lubrication of roller chains is of primary importance for efficient operation as well as correct tensioning.

LUBRICATION

Many driving chains (for example, in factory equipment, or driving a camshaft inside an internal combustion engine) operate in clean environments, and thus the wearing surfaces (that is, the pins and bushings) are safe from precipitation and airborne grit, many even in a sealed environment such as an oil bath. Some roller chains are designed to have o-rings built into the space between the outside link plate and the inside roller link plates. Chain manufacturers began to include this feature in 1971 after the application was invented by Joseph Montano while working for Whitney Chain of Hartford, Connecticut. O-rings were included as a way to improve lubrication to the links of power transmission chains, a service that is vitally important to extending their working life. These rubber fixtures form a barrier that holds factory applied lubricating grease inside the pin and bushing wear areas. Further, the rubber o-rings prevent dirt and other contaminants from entering inside the chain linkages, where such particles would otherwise cause significant wear.[citation needed]

There are also many chains that have to operate in dirty conditions, and for size or operational reasons cannot be sealed. Examples include chains on farm equipment, bicycles, and chain saws. These chains will necessarily have relatively high rates of wear, particularly when the operators are prepared to accept more friction, less efficiency, more noise and more frequent replacement as they neglect lubrication and adjustment.

Many oil-based lubricants attract dirt and other particles, eventually forming an CHINAMFG paste that will compound wear on chains. This problem can be circumvented by use of a “dry” PTFE spray, which forms a solid film after application and repels both particles and moisture.

VARIANTS DESIGN

Layout of a roller chain: 1. Outer plate, 2. Inner plate, 3. Pin, 4. Bushing, 5. Roller
If the chain is not being used for a high wear application (for instance if it is just transmitting motion from a hand-operated lever to a control shaft on a machine, or a sliding door on an oven), then 1 of the simpler types of chain may still be used. Conversely, where extra strength but the smooth drive of a smaller pitch is required, the chain may be “siamesed”; instead of just 2 rows of plates on the outer sides of the chain, there may be 3 (“duplex”), 4 (“triplex”), or more rows of plates running parallel, with bushings and rollers between each adjacent pair, and the same number of rows of teeth running in parallel on the sprockets to match. Timing chains on automotive engines, for example, typically have multiple rows of plates called strands.

Roller chain is made in several sizes, the most common American National Standards Institute (ANSI) standards being 40, 50, 60, and 80. The first digit(s) indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch would be a #40 while a #160 sprocket would have teeth spaced 2 inches apart, etc. Metric pitches are expressed in sixteenths of an inch; thus a metric #8 chain (08B-1) would be equivalent to an ANSI #40. Most roller chain is made from plain carbon or alloy steel, but stainless steel is used in food processing machinery or other places where lubrication is a problem, and nylon or brass are occasionally seen for the same reason.

Roller chain is ordinarily hooked up using a master link (also known as a connecting link), which typically has 1 pin held by a horseshoe clip rather than friction fit, allowing it to be inserted or removed with simple tools. Chain with a removable link or pin is also known as cottered chain, which allows the length of the chain to be adjusted. Half links (also known as offsets) are available and are used to increase the length of the chain by a single roller. Riveted roller chain has the master link (also known as a connecting link) “riveted” or mashed on the ends. These pins are made to be durable and are not removable.

USE

An example of 2 ‘ghost’ sprockets tensioning a triplex roller chain system
Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute; however, at higher speeds, around 2,000 to 3,000 feet per minute, V-belts are normally used due to wear and noise issues.
A bicycle chain is a form of roller chain. Bicycle chains may have a master link, or may require a chain tool for removal and installation. A similar but larger and thus stronger chain is used on most motorcycles although it is sometimes replaced by either a toothed belt or a shaft drive, which offer lower noise level and fewer maintenance requirements.
The great majority of automobile engines use roller chains to drive the camshaft(s). Very high performance engines often use gear drive, and starting in the early 1960s toothed belts were used by some manufacturers.
Chains are also used in forklifts using hydraulic rams as a pulley to raise and lower the carriage; however, these chains are not considered roller chains, but are classified as lift or leaf chains.
Chainsaw cutting chains superficially resemble roller chains but are more closely related to leaf chains. They are driven by projecting drive links which also serve to locate the chain CHINAMFG the bar.

Sea Harrier FA.2 ZA195 front (cold) vector thrust nozzle – the nozzle is rotated by a chain drive from an air motor
A perhaps unusual use of a pair of motorcycle chains is in the Harrier Jump Jet, where a chain drive from an air motor is used to rotate the movable engine nozzles, allowing them to be pointed downwards for hovering flight, or to the rear for normal CHINAMFG flight, a system known as Thrust vectoring.

WEAR

 

The effect of wear on a roller chain is to increase the pitch (spacing of the links), causing the chain to grow longer. Note that this is due to wear at the pivoting pins and bushes, not from actual stretching of the metal (as does happen to some flexible steel components such as the hand-brake cable of a motor vehicle).

With modern chains it is unusual for a chain (other than that of a bicycle) to wear until it breaks, since a worn chain leads to the rapid onset of wear on the teeth of the sprockets, with ultimate failure being the loss of all the teeth on the sprocket. The sprockets (in particular the smaller of the two) suffer a grinding motion that puts a characteristic hook shape into the driven face of the teeth. (This effect is made worse by a chain improperly tensioned, but is unavoidable no matter what care is taken). The worn teeth (and chain) no longer provides smooth transmission of power and this may become evident from the noise, the vibration or (in car engines using a timing chain) the variation in ignition timing seen with a timing light. Both sprockets and chain should be replaced in these cases, since a new chain on worn sprockets will not last long. However, in less severe cases it may be possible to save the larger of the 2 sprockets, since it is always the smaller 1 that suffers the most wear. Only in very light-weight applications such as a bicycle, or in extreme cases of improper tension, will the chain normally jump off the sprockets.

The lengthening due to wear of a chain is calculated by the following formula:

M = the length of a number of links measured

S = the number of links measured

P = Pitch

In industry, it is usual to monitor the movement of the chain tensioner (whether manual or automatic) or the exact length of a drive chain (one rule of thumb is to replace a roller chain which has elongated 3% on an adjustable drive or 1.5% on a fixed-center drive). A simpler method, particularly suitable for the cycle or motorcycle user, is to attempt to pull the chain away from the larger of the 2 sprockets, whilst ensuring the chain is taut. Any significant movement (e.g. making it possible to see through a gap) probably indicates a chain worn up to and beyond the limit. Sprocket damage will result if the problem is ignored. Sprocket wear cancels this effect, and may mask chain wear.

CHAIN STRENGTH

The most common measure of roller chain’s strength is tensile strength. Tensile strength represents how much load a chain can withstand under a one-time load before breaking. Just as important as tensile strength is a chain’s fatigue strength. The critical factors in a chain’s fatigue strength is the quality of steel used to manufacture the chain, the heat treatment of the chain components, the quality of the pitch hole fabrication of the linkplates, and the type of shot plus the intensity of shot peen coverage on the linkplates. Other factors can include the thickness of the linkplates and the design (contour) of the linkplates. The rule of thumb for roller chain operating on a continuous drive is for the chain load to not exceed a mere 1/6 or 1/9 of the chain’s tensile strength, depending on the type of master links used (press-fit vs. slip-fit)[citation needed]. Roller chains operating on a continuous drive beyond these thresholds can and typically do fail prematurely via linkplate fatigue failure.

The standard minimum ultimate strength of the ANSI 29.1 steel chain is 12,500 x (pitch, in inches)2. X-ring and O-Ring chains greatly decrease wear by means of internal lubricants, increasing chain life. The internal lubrication is inserted by means of a vacuum when riveting the chain together.

CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CHINAMFG Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CHINAMFG range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Alloy
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1045, Stainless Steel , Q235, Brass
Structure: Roller Chain
Samples:
US$ 0/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

mechanical

What are the industry standards and regulations for mechanical chains?

When it comes to mechanical chains, there are several industry standards and regulations that govern their design, manufacturing, and usage. These standards ensure the quality, safety, and performance of mechanical chains. Here are some of the important standards and regulations relevant to mechanical chains:

  • ISO Standards: The International Organization for Standardization (ISO) has developed various standards related to mechanical chains. ISO 606 specifies the basic dimensions of roller chains, ISO 10823 provides guidelines for the selection of roller chains, and ISO 13981 covers the calculation of chain tensile strength.
  • ANSI Standards: The American National Standards Institute (ANSI) has developed standards for roller chains, such as ANSI/ASME B29.1, which covers transmission roller chains, and ANSI/ASME B29.3, which pertains to agricultural roller chains.
  • ASME Standards: The American Society of Mechanical Engineers (ASME) has published standards related to mechanical chains, including ASME B29.100, which provides guidelines for the design, selection, and installation of conveyor chains, and ASME B29.21, which covers leaf chains.
  • EU Machinery Directive: In the European Union, the Machinery Directive 2006/42/EC sets out essential health and safety requirements for machinery, including mechanical chains. Compliance with this directive is mandatory for manufacturers placing machinery on the market in the EU.
  • OSHA Regulations: The Occupational Safety and Health Administration (OSHA) in the United States has regulations concerning machinery and mechanical power transmission apparatus, which may include requirements for the use and maintenance of mechanical chains in industrial settings.

It is important for manufacturers, designers, and users of mechanical chains to be familiar with these standards and regulations to ensure compliance, safety, and reliability in their applications. Adhering to these standards not only helps in selecting and using the appropriate mechanical chains but also promotes best practices for their installation, maintenance, and operation.

mechanical

What are the alternatives to mechanical chains in certain applications?

In certain applications, mechanical chains may not be the most suitable option, and alternative power transmission systems or lifting mechanisms can be used. Here are some alternatives to mechanical chains:

  • Belts and Pulleys: Belts and pulleys provide an alternative to mechanical chains for transmitting power or motion. They are commonly used in applications where quiet operation, high-speed capabilities, and precise positioning are required. Belts are flexible and can transmit power over long distances, while pulleys provide the means to transfer power between different components.
  • Gear Systems: Gear systems use interlocking toothed wheels to transmit power or motion. They are suitable for applications that require high torque, precise control, and compact design. Gear systems are commonly used in machinery, automotive transmissions, and robotics.
  • Hydraulic Systems: Hydraulic systems use pressurized fluid to transmit power and control motion. They are commonly used in heavy-duty applications that require high force, such as construction equipment, material handling, and hydraulic presses. Hydraulic systems provide smooth operation, precise control, and the ability to transmit power over long distances.
  • Pneumatic Systems: Pneumatic systems use compressed air to transmit power and control motion. They are suitable for applications that require fast and precise actuation, such as in automation, robotics, and industrial machinery. Pneumatic systems offer lightweight and flexible operation, easy control, and resistance to environmental contaminants.
  • Electric Actuators and Motors: Electric actuators and motors convert electrical energy into mechanical motion. They are commonly used in various applications, including robotics, automation, conveyor systems, and precision positioning. Electric actuators and motors provide precise control, high efficiency, and the ability to integrate with electronic control systems.

The choice of alternative power transmission systems depends on the specific requirements of the application, such as load capacity, speed, precision, environmental conditions, and control requirements. It is essential to consider factors like power requirements, space limitations, operating conditions, and cost-effectiveness when selecting the most suitable alternative to a mechanical chain.

China supplier Chain Manufacturer 28A-2 a Series Short Pitch Precision Duplex Mechanical Industrial & Agricultural Driving Chains and Bush Chains for Forklift &Car Parking  China supplier Chain Manufacturer 28A-2 a Series Short Pitch Precision Duplex Mechanical Industrial & Agricultural Driving Chains and Bush Chains for Forklift &Car Parking
editor by CX 2024-04-09

China best Transmitting Mechanical Power Automobile Duplex Plastic Roller Cleaner Chainsaw Bike Chainsaw Chain Pump Bicycle Bike Drive Chain

Product Description

Transmitting Mechanical Power Automobile Duplex Plastic Roller Cleaner Chainsaw Bike Chainsaw Chain Pump Bicycle Bike Drive Chain

Item Name Standard transmission Roller Chains Model Series A, Series B
Row Simplex/Duplex/Triplex Application Machinery Parts
Surface Treatment Self-color/sand-blasted/shot-peening Certification ISO, ANSI, DIN, BS
Packing Packaged in boxes and wooden cases, or packaged in reels and then on pallets. Port Any sea port or airport in China

Related products

 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Stainless steel
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

mechanical

How to select the appropriate lubricant for a mechanical chain?

Choosing the right lubricant for a mechanical chain is crucial for ensuring optimal performance, reducing wear, and extending the chain’s lifespan. Here are the steps to select the appropriate lubricant:

  1. Identify the operating conditions: Consider the environment in which the mechanical chain operates, including temperature, humidity, presence of contaminants, and potential exposure to water, chemicals, or other substances.
  2. Determine the chain speed and load: Understand the chain’s operating speed and the amount of load it carries. Higher speeds and heavier loads may require lubricants with specific viscosity and load-carrying capabilities.
  3. Consult manufacturer recommendations: Check the manufacturer’s guidelines and recommendations for the specific mechanical chain. They often provide information on the type of lubricant suitable for the chain.
  4. Consider the lubricant properties: Evaluate the lubricant’s properties, such as viscosity, temperature range, anti-wear additives, corrosion resistance, and compatibility with the chain material. The lubricant should be able to withstand the operating conditions and provide adequate lubrication and protection.
  5. Assess maintenance requirements: Consider the maintenance schedule and ease of lubrication. Some lubricants may require more frequent application or specialized equipment for lubrication.
  6. Comply with industry regulations: In certain industries, there may be specific regulations or standards for lubricants. Ensure the selected lubricant meets the required specifications.
  7. Perform field trials if necessary: In critical applications or unique operating conditions, it may be beneficial to conduct field trials with different lubricants to determine the most suitable one.

It is advisable to consult with lubricant manufacturers, suppliers, or industry experts for specific guidance on selecting the appropriate lubricant for your mechanical chain. They can provide valuable insights and recommendations based on their expertise and knowledge of lubrication products.

mechanical

How to optimize the efficiency of a mechanical chain system?

Efficiency is a crucial factor in ensuring the optimal performance of a mechanical chain system. Here are some ways to optimize the efficiency of a mechanical chain system:

  • Proper Lubrication: Regularly lubricating the mechanical chain with the appropriate lubricant helps reduce friction and wear, resulting in smoother operation and improved efficiency. It is important to follow the manufacturer’s recommendations for lubrication intervals and use lubricants suitable for the specific application and operating conditions.
  • Correct Tensioning: Maintaining the proper tension in the mechanical chain is essential for efficient power transmission. Over-tensioning can increase friction and strain on the components, while under-tensioning can result in slippage and reduced efficiency. Follow the manufacturer’s guidelines to ensure the mechanical chain is correctly tensioned.
  • Alignment and Sprocket Condition: Proper alignment of the sprockets and ensuring their good condition is crucial for efficient power transmission. Misaligned or worn sprockets can cause uneven loading, increased friction, and reduced efficiency. Regularly inspect the sprockets and replace them if necessary to maintain optimal efficiency.
  • Reducing Excessive Loads: Excessive loads on the mechanical chain can lead to increased friction and reduced efficiency. Ensuring the mechanical chain is appropriately sized for the intended load and application is important. Avoiding overloading and implementing load-sharing mechanisms when necessary can help optimize the efficiency of the system.
  • Minimizing Backlash: Backlash refers to the slight movement or play between the engaged components of the mechanical chain system. Minimizing backlash helps improve precision and efficiency. It can be achieved by using backlash-reducing components, proper tensioning, and maintaining good component alignment.
  • Regular Inspection and Maintenance: Conducting regular inspections and maintenance tasks, such as cleaning, lubrication, and component replacement, helps identify and address potential issues that can affect the efficiency of the mechanical chain system. Follow the manufacturer’s maintenance guidelines and establish a proactive maintenance schedule.

By implementing these optimization techniques, it is possible to improve the efficiency of a mechanical chain system, resulting in smoother operation, reduced energy consumption, and extended service life of the components.

mechanical

What lubrication is recommended for a mechanical chain?

Lubrication plays a critical role in maintaining the performance and lifespan of a mechanical chain. The type and application of lubrication depend on various factors such as the chain material, operating conditions, and the manufacturer’s recommendations. Here are some commonly used lubrication options for mechanical chains:

  • Chain Oil: Chain oils specifically designed for mechanical chains offer excellent lubrication and protection against wear. These oils have good adhesion properties, allowing them to stay in place and provide continuous lubrication even under high loads and speeds.
  • Grease: Greases formulated for chain applications can provide excellent lubrication and protection. They are suitable for chains operating at lower speeds and under moderate loads. Grease provides better sealing and can reduce the risk of dirt and contaminants entering the chain system.
  • Dry Film Lubricant: Dry film lubricants, such as PTFE or molybdenum disulfide coatings, are applied as a thin film onto the chain surfaces. They offer good lubrication and reduce friction without attracting dirt and debris. Dry film lubricants are often used in applications where oil or grease may attract contaminants.
  • Specialty Lubricants: Depending on the specific application and operating conditions, there are specialty lubricants available, such as high-temperature lubricants, food-grade lubricants for food processing applications, or extreme pressure lubricants for heavy-duty and high-load chains.

It’s important to follow the manufacturer’s recommendations for lubrication type, frequency, and application method. They can provide specific guidelines based on the chain design and operating conditions. Regularly monitoring the lubrication levels and reapplying lubricant as necessary will help ensure optimal chain performance and longevity.

It’s worth noting that some chains may come pre-lubricated from the manufacturer, while others may require initial lubrication before use. Consult the manufacturer’s documentation or contact their technical support for specific lubrication requirements for your mechanical chain.

China best Transmitting Mechanical Power Automobile Duplex Plastic Roller Cleaner Chainsaw Bike Chainsaw Chain Pump Bicycle Bike Drive Chain  China best Transmitting Mechanical Power Automobile Duplex Plastic Roller Cleaner Chainsaw Bike Chainsaw Chain Pump Bicycle Bike Drive Chain
editor by CX 2023-10-09

China Professional Transmission Drive Mechanical Industrial Standard Conveyor Silent Motor Bush Cogs Stainless Steel Roller Duplex Engineering Cast Special Leaf Chain

Product Description

transmission drive mechanical industrial standard conveyor silent motor bush cogs Stainless steel  roller duplex Engineering Cast Special leaf chain 

Usage: Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain
Material: Iron
Surface Treatment: Oil Blooming
Feature: Oil Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

mechanical

Can a mechanical chain be used for heavy-duty applications?

Yes, a mechanical chain can be used for heavy-duty applications. Mechanical chains are designed to withstand high loads and provide reliable power transmission in demanding industrial settings. Here are some reasons why mechanical chains are suitable for heavy-duty applications:

  • Strength and durability: Mechanical chains are made from high-strength materials such as alloy steel or stainless steel, which give them excellent tensile strength and durability to handle heavy loads.
  • Wide range of sizes and capacities: Mechanical chains are available in various sizes and configurations to accommodate different load capacities. They can be selected based on the specific requirements of the heavy-duty application.
  • Effective power transmission: Mechanical chains efficiently transfer power from the driver sprocket to the driven sprocket, ensuring reliable performance even under heavy loads.
  • Ability to handle shock loads: Mechanical chains are designed to absorb and distribute shock loads, which is crucial in heavy-duty applications where sudden impacts or changes in load can occur.
  • Options for specialized chains: There are specialized types of mechanical chains available for specific heavy-duty applications, such as roller chains for conveying heavy materials or conveyor chains for material handling systems.

When selecting a mechanical chain for heavy-duty applications, it’s important to consider factors such as the load capacity, operating conditions, lubrication requirements, and maintenance considerations. Additionally, proper installation, tensioning, and regular inspection of the chain are essential to ensure optimal performance and longevity in heavy-duty applications.

mechanical

What are the alternatives to mechanical chains in certain applications?

In certain applications, mechanical chains may not be the most suitable option, and alternative power transmission systems or lifting mechanisms can be used. Here are some alternatives to mechanical chains:

  • Belts and Pulleys: Belts and pulleys provide an alternative to mechanical chains for transmitting power or motion. They are commonly used in applications where quiet operation, high-speed capabilities, and precise positioning are required. Belts are flexible and can transmit power over long distances, while pulleys provide the means to transfer power between different components.
  • Gear Systems: Gear systems use interlocking toothed wheels to transmit power or motion. They are suitable for applications that require high torque, precise control, and compact design. Gear systems are commonly used in machinery, automotive transmissions, and robotics.
  • Hydraulic Systems: Hydraulic systems use pressurized fluid to transmit power and control motion. They are commonly used in heavy-duty applications that require high force, such as construction equipment, material handling, and hydraulic presses. Hydraulic systems provide smooth operation, precise control, and the ability to transmit power over long distances.
  • Pneumatic Systems: Pneumatic systems use compressed air to transmit power and control motion. They are suitable for applications that require fast and precise actuation, such as in automation, robotics, and industrial machinery. Pneumatic systems offer lightweight and flexible operation, easy control, and resistance to environmental contaminants.
  • Electric Actuators and Motors: Electric actuators and motors convert electrical energy into mechanical motion. They are commonly used in various applications, including robotics, automation, conveyor systems, and precision positioning. Electric actuators and motors provide precise control, high efficiency, and the ability to integrate with electronic control systems.

The choice of alternative power transmission systems depends on the specific requirements of the application, such as load capacity, speed, precision, environmental conditions, and control requirements. It is essential to consider factors like power requirements, space limitations, operating conditions, and cost-effectiveness when selecting the most suitable alternative to a mechanical chain.

mechanical

What are the different types of mechanical chains available?

There are several types of mechanical chains available, each designed for specific applications and requirements. Here is a detailed explanation:

  • Roller Chains: Roller chains are the most common type of mechanical chains. They consist of inner and outer plates, pins, bushings, and rollers. The rollers are free to rotate on the bushings, reducing friction and enabling smoother motion. Roller chains are known for their high load-carrying capacity and are widely used in industrial machinery, automotive systems, and power transmission applications.
  • Silent Chains: Silent chains, also known as inverted-tooth chains, feature tooth-shaped links with rounded edges that engage with matching sprockets. They offer a smooth and quiet operation, making them suitable for applications where noise reduction is desired, such as timing drives in engines, power tools, and office equipment.
  • Leaf Chains: Leaf chains consist of interleaved link plates and pins. They are known for their high tensile strength and resistance to fatigue, making them suitable for heavy-duty applications such as forklifts, cranes, and construction machinery.
  • Double-Pitch Chains: Double-pitch chains have twice the pitch length of standard roller chains, resulting in larger gaps between the links. They are commonly used in applications where slower speeds and lighter loads are required, such as conveyor systems.
  • Engineered Chains: Engineered chains are designed for specific applications and operating conditions. They include specialty chains such as corrosion-resistant chains, high-temperature chains, food-grade chains, and chains designed for harsh environments. These chains are tailored to meet the unique requirements of industries such as food processing, automotive manufacturing, and chemical processing.
  • Drag Chains: Drag chains, also known as cable carriers or energy chains, are used to manage and protect cables, hoses, and other fluid or electrical lines in moving applications. They provide a flexible and enclosed pathway for these lines, ensuring safe and reliable operation in machinery such as robotics, automated equipment, and machine tools.
  • Timing Chains: Timing chains are designed specifically for synchronizing the movement of engine components in internal combustion engines. They have precise tooth profiles that engage with corresponding teeth on the sprockets, ensuring accurate valve timing and engine performance.

Each type of mechanical chain has its unique design, construction, and characteristics suited for specific applications. When selecting a mechanical chain, factors such as load capacity, operating conditions, speed, and environmental factors should be considered to ensure optimal performance and longevity.

It is important to follow the manufacturer’s recommendations regarding installation, lubrication, and maintenance to ensure the proper functioning and extended service life of the mechanical chain. Regular inspection, lubrication, and tension adjustment, if necessary, are essential for maintaining optimal performance and minimizing wear.

In summary, the different types of mechanical chains available include roller chains, silent chains, leaf chains, double-pitch chains, engineered chains, drag chains, and timing chains. Each type is designed to fulfill specific requirements in terms of load capacity, noise reduction, corrosion resistance, precision timing, or cable management. Choosing the right type of mechanical chain for a particular application is crucial for ensuring efficient power transmission, reliable operation, and extended chain life.

China Professional Transmission Drive Mechanical Industrial Standard Conveyor Silent Motor Bush Cogs Stainless Steel Roller Duplex Engineering Cast Special Leaf Chain  China Professional Transmission Drive Mechanical Industrial Standard Conveyor Silent Motor Bush Cogs Stainless Steel Roller Duplex Engineering Cast Special Leaf Chain
editor by CX 2023-09-21

China wholesaler Transmission Drive Bush Roller Duplex Engineering Mechanical Industrial Standard Conveyor Chain

Product Description

Model NO. 06C/08A/10A/12A/16A/20A/24A/28A/32A/40A/06B/08B/10B/12B/16B/20B/24B/28B/32B/40B-1/2/3
Heavy duty
Chain Model Roller Chains
Structure (for Chain) Roller Chain
Specification GB/T, DIN, ANSI, ISO, BS, JIS.
Origin HangZhou, ZheJiang
Color Solid Color
Chain Color Customized

Our company

Wolff Chain Co. is 1 of the professional chain manufacturers in China. We focus on reseaching, manufacturing and trading of the chain drive with famous brands — “DOVON” and “DECHO”. We supply OEM services for many famous enterprises such as SUZUKI, XIHU (WEST LAKE) DIS., FAW, AGCO, JUMING as well. 

Wolff mainly producing the Transmission chains,Conveyor chains,Dragging Chains,Silent chains,Leaf chains,Roller chains,Special chain and many other series of chain products. Our technicians a have improved the chains quality to the world-level. High quality material selection, powerful and precise heat-treatment technology and excellent assembly methods ensure Wolff chains meet the tough and strict requirements for machines and vehicles. 

All of our products completely conform to the international standard such as ISO\DIN\ANSI\BS\JIS, etc. Wolff has been successfully certified by ISO9001 Quality Management System,SGS inspection and BV inspection. Wolff chains can be widely applied to many industries including automobile, motorcycle, forklift, wood processing machine, constructure machine, packing machine, food machine,tobacco machine and agricultural equipments. Wolff chains are popular in America,South America,Europe,Middle East, South East Asia and Africa markets.

Our workshop

Our certification

Welcome to our exhibition

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special request about packing, pls negotiate with us in advance, we can pack the goods as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance. Other payments terms, pls negotiate with us in advance, we can discuss.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.We welcome sample order.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

Shipping Cost:

Estimated freight per unit.



To be negotiated
Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Marine, Mining Equipment
Surface Treatment: Oil Blooming
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

mechanical

How to troubleshoot chain skipping or slipping issues?

Chain skipping or slipping can occur in mechanical chain systems and can lead to performance issues and potential safety hazards. Here are some steps to troubleshoot and address these problems:

  1. Check chain tension: Improper chain tension can cause skipping or slipping. Ensure the chain is properly tensioned according to the manufacturer’s specifications. If the chain is too loose, adjust the tension to the recommended level.
  2. Inspect sprockets: Worn or damaged sprockets can cause chain skipping. Inspect the sprockets for signs of wear, such as worn teeth or grooves. Replace any damaged or worn-out sprockets to ensure proper engagement with the chain.
  3. Examine chain wear: Excessive chain wear can lead to poor engagement with the sprockets, resulting in skipping. Measure the chain for elongation using a chain wear gauge. If the chain is significantly elongated beyond the manufacturer’s specifications, it may need to be replaced.
  4. Inspect chain lubrication: Insufficient lubrication can increase friction and cause the chain to skip or slip. Ensure the chain is adequately lubricated according to the manufacturer’s recommendations. Apply the appropriate lubricant to all chain links and ensure even distribution.
  5. Check for debris or foreign objects: Foreign objects or debris lodged between the chain and sprockets can disrupt the chain’s engagement and cause skipping. Inspect the chain and sprockets for any debris, such as dirt, dust, or trapped objects. Clean the chain and sprockets thoroughly to remove any obstructions.
  6. Inspect chain condition: Damaged or worn-out chain components, such as bent or twisted links, can contribute to skipping. Carefully examine the chain for any visible damage or deformities. If any components are damaged, replace them with new ones.
  7. Ensure proper alignment: Misalignment between the chain and sprockets can lead to skipping. Check the alignment of the sprockets and make adjustments if necessary. Proper alignment will ensure the chain engages smoothly and securely.
  8. Consider upgrading the chain: If skipping or slipping issues persist despite troubleshooting steps, it may be necessary to upgrade to a higher-quality or more suitable chain for the specific application. Consult with experts or the chain manufacturer for recommendations.

By following these troubleshooting steps, it is possible to identify and address the underlying causes of chain skipping or slipping issues. Regular inspection, proper maintenance, and adherence to manufacturer guidelines are crucial in ensuring the smooth and reliable operation of mechanical chains.

mechanical

What is the maximum load capacity of a mechanical chain?

The maximum load capacity of a mechanical chain depends on several factors, including the chain design, material, size, and configuration. Each type of mechanical chain has its own load capacity rating, which is determined by the manufacturer based on extensive testing and analysis. It is important to consult the manufacturer’s specifications and guidelines to determine the specific load capacity for a particular mechanical chain.

Typically, the load capacity of a mechanical chain is expressed in terms of its maximum allowable tension or working load. This is the maximum force or load that the chain can withstand without experiencing excessive wear, deformation, or failure. The load capacity of a mechanical chain is influenced by factors such as:

  • Chain material and construction: Different materials, such as steel, stainless steel, or plastic, have varying load-bearing capabilities.
  • Chain size and pitch: Larger chain sizes often have higher load capacities compared to smaller sizes.
  • Chain configuration: The type of chain, such as roller chain, silent chain, or leaf chain, can affect its load capacity.
  • Operating conditions: Factors like speed, temperature, and environmental conditions can influence the chain’s load capacity.

It is important to note that exceeding the maximum load capacity of a mechanical chain can lead to premature wear, chain elongation, sprocket wear, and potential chain failure, which can result in equipment damage or personal injury. Therefore, it is crucial to carefully consider the load requirements of your application and select a mechanical chain that can safely handle the anticipated loads.

For accurate and reliable load capacity information, refer to the manufacturer’s documentation, technical specifications, or consult with their engineering or customer support team. They can provide detailed load capacity charts and guidelines specific to their mechanical chain products.

mechanical

What are the signs of a worn-out mechanical chain?

A worn-out mechanical chain can lead to reduced performance, increased downtime, and potential equipment damage. It’s important to identify the signs of a worn-out chain to prevent failures and ensure timely replacement. Here are the common signs to look for:

  • Chain Elongation: Measure the chain’s pitch and compare it to the original specification. If the chain has elongated beyond the recommended limit, it indicates wear and potential failure.
  • Inconsistent Movement: A worn chain may exhibit irregular movement, including jerking or skipping motion. This can result from stretched or worn links, causing the chain to lose engagement with the sprockets.
  • Excessive Noise: Worn-out chains often produce more noise than properly functioning chains. Listen for unusual rattling, clanking, or grinding sounds during chain operation.
  • Visual Wear: Inspect the chain for visible signs of wear, such as elongated pin holes, flattened or damaged rollers, cracked plates, or excessive dirt accumulation. These signs indicate that the chain is reaching the end of its service life.
  • High Vibration: A worn chain can cause increased vibration in the system, leading to additional stress on the components. Monitor for excessive vibration during chain operation.
  • Poor Tension: If the chain consistently requires readjustment to maintain proper tension, it may be a sign of wear or elongation.
  • Inefficient Power Transmission: A worn chain may result in decreased power transfer efficiency, causing a decline in overall system performance.
  • Frequent Lubrication Requirements: If the chain requires more frequent lubrication than before, it could be an indication of increased friction due to wear.

If you notice any of these signs, it is advisable to replace the worn-out mechanical chain promptly. Regular inspection and maintenance can help identify these signs early, preventing potential damage and improving the overall reliability of the chain system.

China wholesaler Transmission Drive Bush Roller Duplex Engineering Mechanical Industrial Standard Conveyor Chain  China wholesaler Transmission Drive Bush Roller Duplex Engineering Mechanical Industrial Standard Conveyor Chain
editor by CX 2023-09-05

China OEM Transmission Drive Bush Roller Duplex Engineering Mechanical Industrial Standard Conveyor Chain

Product Description

Model NO. 06C/08A/10A/12A/16A/20A/24A/28A/32A/40A/06B/08B/10B/12B/16B/20B/24B/28B/32B/40B-1/2/3
Heavy duty
Chain Model Roller Chains
Structure (for Chain) Roller Chain
Specification GB/T, DIN, ANSI, ISO, BS, JIS.
Origin HangZhou, ZheJiang
Color Solid Color
Chain Color Customized

Our company

Wolff Chain Co. is 1 of the professional chain manufacturers in China. We focus on reseaching, manufacturing and trading of the chain drive with famous brands — “DOVON” and “DECHO”. We supply OEM services for many famous enterprises such as SUZUKI, XIHU (WEST LAKE) DIS., FAW, AGCO, JUMING as well. 

Wolff mainly producing the Transmission chains,Conveyor chains,Dragging Chains,Silent chains,Leaf chains,Roller chains,Special chain and many other series of chain products. Our technicians a have improved the chains quality to the world-level. High quality material selection, powerful and precise heat-treatment technology and excellent assembly methods ensure Wolff chains meet the tough and strict requirements for machines and vehicles. 

All of our products completely conform to the international standard such as ISO\DIN\ANSI\BS\JIS, etc. Wolff has been successfully certified by ISO9001 Quality Management System,SGS inspection and BV inspection. Wolff chains can be widely applied to many industries including automobile, motorcycle, forklift, wood processing machine, constructure machine, packing machine, food machine,tobacco machine and agricultural equipments. Wolff chains are popular in America,South America,Europe,Middle East, South East Asia and Africa markets.

Our workshop

Our certification

Welcome to our exhibition

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special request about packing, pls negotiate with us in advance, we can pack the goods as your request.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance. Other payments terms, pls negotiate with us in advance, we can discuss.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.We welcome sample order.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

Shipping Cost:

Estimated freight per unit.



To be negotiated
Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Marine, Mining Equipment
Surface Treatment: Oil Blooming
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

mechanical

How to ensure proper alignment of a mechanical chain system?

Proper alignment is crucial for the smooth and efficient operation of a mechanical chain system. Here are the steps to ensure proper alignment:

  • Check initial alignment: During the installation of the mechanical chain system, ensure that the sprockets are aligned properly. Use precision alignment tools, such as straightedges or laser alignment devices, to verify that the sprocket shafts are parallel and at the correct distance.
  • Inspect and adjust tension: Proper tension is essential for optimal chain performance. Check the tension of the chain regularly and adjust it as needed using the recommended tensioning methods provided by the chain manufacturer. Avoid over-tensioning, as it can lead to increased wear and premature failure.
  • Inspect sprocket teeth: Examine the sprocket teeth for signs of wear or damage. Worn or damaged teeth can cause the chain to run off-track, leading to poor alignment. Replace any worn or damaged sprockets promptly.
  • Check chain alignment during operation: Observe the chain’s movement during operation to ensure it runs smoothly and stays properly engaged with the sprockets. Look for any signs of misalignment, such as excessive vibration, noise, or uneven wear on the chain or sprockets.
  • Adjust chain tension and alignment: If misalignment is detected during operation, make the necessary adjustments. This may involve repositioning the sprockets, aligning the chain guide rails, or adjusting the tension to ensure proper engagement.
  • Regularly inspect and maintain: Perform regular inspections and maintenance of the mechanical chain system to identify and address any alignment issues promptly. This includes lubrication, cleaning, and periodic replacement of worn components.

Proper alignment of a mechanical chain system helps prevent premature wear, reduces power loss, minimizes noise and vibration, and improves overall system performance. Following these steps and consulting the manufacturer’s guidelines will ensure the alignment of your mechanical chain system remains optimal.

mechanical

What is the maximum load capacity of a mechanical chain?

The maximum load capacity of a mechanical chain depends on several factors, including the chain design, material, size, and configuration. Each type of mechanical chain has its own load capacity rating, which is determined by the manufacturer based on extensive testing and analysis. It is important to consult the manufacturer’s specifications and guidelines to determine the specific load capacity for a particular mechanical chain.

Typically, the load capacity of a mechanical chain is expressed in terms of its maximum allowable tension or working load. This is the maximum force or load that the chain can withstand without experiencing excessive wear, deformation, or failure. The load capacity of a mechanical chain is influenced by factors such as:

  • Chain material and construction: Different materials, such as steel, stainless steel, or plastic, have varying load-bearing capabilities.
  • Chain size and pitch: Larger chain sizes often have higher load capacities compared to smaller sizes.
  • Chain configuration: The type of chain, such as roller chain, silent chain, or leaf chain, can affect its load capacity.
  • Operating conditions: Factors like speed, temperature, and environmental conditions can influence the chain’s load capacity.

It is important to note that exceeding the maximum load capacity of a mechanical chain can lead to premature wear, chain elongation, sprocket wear, and potential chain failure, which can result in equipment damage or personal injury. Therefore, it is crucial to carefully consider the load requirements of your application and select a mechanical chain that can safely handle the anticipated loads.

For accurate and reliable load capacity information, refer to the manufacturer’s documentation, technical specifications, or consult with their engineering or customer support team. They can provide detailed load capacity charts and guidelines specific to their mechanical chain products.

China OEM Transmission Drive Bush Roller Duplex Engineering Mechanical Industrial Standard Conveyor Chain  China OEM Transmission Drive Bush Roller Duplex Engineering Mechanical Industrial Standard Conveyor Chain
editor by CX 2023-08-18

China factory Duplex Short Pitch Precision Roller Chain (A series) Chain (DIN764) CZPT bush chain

Product Description

XIHU (WEST LAKE) DIS.HUA Chain Group is the most professional manufacturer of power transmission in China, manufacturing roller chains, industry sprockets, motorcycle sprockets, casting sprockets, different type of couplings, pulleys, taper bushes, locking devices, gears, shafts, CNC precision parts and so on. We have passed ISO9001, ISO14001, TS16949 such quality and enviroment certification

We adopt good quality raw material and strict with DIN, ANSI, JIS standard ect, We have professional quality conrol team, complet equipment, advanaced technology. In 1999, Xihu (West Lake) Dis.hua obtained ISO9001 Certificate of Quality Assurance System, besides, the company also devotes itselt o environmental protection, In2002, it also obtained ISO14001 Certificate of Environment Management System.

Short pitch precision roller chains (A series)   15-240 simlex to eightlex includ normal short pitch precisson roller chains and heavy duty series roller chains

Short pitch precision roller chains (B series)   04B-72B simlex to triplex includ normal short pitch precisson roller chains and heavy duty series roller chains

SHORT PITCH PRECISSION ROLLER CHAINS (A SERIES)
Material: Alloy Steel
Surface Treatment: Shot Peening / Blacking / Blueing
Main Application: Idustry machinery

Product name  Duplex Short Pitch Precision Roller Chain (A series) Chain (DIN764)
Materials Available 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment Annealing, natural anodization, heat treatment,  polishing, nickel plating, chrome plating, znic plating,yellow passivation, gold passivation,  satin, Black surface painted etc.
Products Available sprockt chains, pulley, shafts(axles, spline shafts, dart shafts),gears (pinions, wheels gear rack) bearing, bearing seat,  bushing, coupling, lock assembly etc.
Processing Method CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC : Technicians self-check in production,final-check before package by  professional Quality inspector
Size Drawings
Package Wooden Case/Container and pallet, or as per customized specifications
Certificate ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Advantage Quality first Service superior , Advanced equipment,Experienced workers,Perfect testing equipment
Lead Time 15-25days samples. 30-45days offcial order

Usage: Transportation Chain
Material: Alloy/Carbon Steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Customization:
Available

|

Customized Request

chain

Different types of drive chains

Drive chains are an important part of many different types of machinery. In this article, we’ll cover a variety of different types, from square links to engineered steel. From there, we’ll discuss different types of chains, such as double and leaf chains. Let’s take a closer look at each one. Once you know what kind of chain you’re looking for, you can make a buying decision. If you’re not sure where to start, read on to learn more about these types of chains, what to look for when choosing, and how to choose the right chain for your specific application.

Engineering Steel Chain

Engineering steel chains are widely used in conveyors, bucket elevators, tensioning links, transmission chains, etc., and have the characteristics of high strength, low friction, and good shock resistance. Early models of these chains were developed for difficult-to-convey applications. They were originally made of all-steel components with flanged rollers made of cast iron. They then increase in size, strength, and spacing in response to the heavy-duty requirements of the industry.
Today, these chains are used in a wide variety of applications, including tough oil drilling operations and forklifts. They offer excellent durability and high power transfer and are available in a variety of materials. They are also ideal for harsh environments such as harsh oil drilling. Their high-strength steel construction means they can handle harsh operating conditions. Their durability is an essential feature of any chain, and CZPT Chains offers a full line of engineered steel chains to meet your exact specifications.
A drive chain made of engineered steel consists of several components: links, pin joints, and sprockets. This allows them to carry heavy loads with minimal stretch. Due to its internal mechanical advantage, the chain runs around the sprockets with almost 100% efficiency. Also, the chain is made of special steel that can withstand certain conditions. They are available in different alloys and grades. If you have any questions, please feel free to contact us.
Roller chain wear is a major problem for conveyor and drive chains. In these cases, the rollers of the chain are more prone to wear than the bushings, so lubrication is essential. Many chains are designed to work with little or no lubrication. Finally, material selection is an important factor in the design of engineered steel conveyor chains. These factors will help ensure that the chain stays in good shape.

Conveyor Chains with Square Links

There are two basic types of conveyor chains. The first is the square chain, commonly used in cranes and hoists. It’s cheap to manufacture but more prone to overload. The second is a chain that uses hook joints or detachable links. These are used for short-term power transmission and have a lubricating effect. Usually, they are made of malleable iron but can be more expensive.
Another type of chain is the removable steel chain. For moderate loads, this is an easy-to-install option. The closed end of the tab should face the sprocket. It is very important to maintain the alignment of the chain relative to the sprockets. The chain should be adjusted to suit the load before installation. It is important to keep the chain lubricated to prolong its life.
Steel chains offer a wider selection of materials and heat treatments. This chain is also more accurate than its counterpart. Steel bushing chains are less expensive but require more frequent lubrication. Steel roller chains are often used for long conveyor centers or high loads. However, lower friction requirements require lower strength chains. This means that chains with square links are a better choice for smaller conveyors. But this style has its drawbacks.
Bushing chains are made of steel and are an excellent alternative for small-scale applications. The pins are silent and prevent tooth damage. Bushed roller chains are also used to a certain extent as conveyor chains. However, the main advantage of the bushing roller chain is that it does not make any noise at all. Bushed roller chains are made of alloy steel and are suitable for very low-speed applications.
chain

double chain

Double-strand roller chain, also known as a double-strand, consists of two rows of single-strand links. It has high impact strength, low weight, and a small form factor. Duplex roller chains are manufactured using CZPT technology, which uses solid rollers to improve sprocket tooth rotation and reduce shock loads. During the manufacturing process, the metal is heat-treated to increase strength and reduce corrosion.
A single chain is designed for a single sprocket, while a double chain consists of two identical chains connected side by side. Double chains are more durable than simple chains because double rollers contain roller bearings, pins, and other components. Simplex drive chains can handle high loads, while duplex drive chains are designed for medium-duty applications.

leaf chain

Blade chains are used in reciprocating devices such as forklifts. They are also used in machine tools for counterweight chains. Leaf chains come in a variety of lengths, usually with female or male ends. Leaf chains can be manufactured in even or odd pitches and are ideal for lifting and balancing. This article will introduce some key uses of leaf chains in drive chains. Additionally, we’ll discuss how they are made and how they behave in applications.
Most drive chains today are made from leaf chains. These chains are designed to increase the strength of the chain. However, they are less expensive than other types of chains. You can also purchase specialized leaf chains for certain applications. CZPT Chain also offers custom leaf chains for your unique needs. Leaf chains are commonly used in forklifts, material handling, and lifting applications. They are usually made from high-quality components. The BL1688 Leaf Chain has 8 x 8 laces and is sold in 10-foot boxes or 25- to 100-foot reels. The leaf chain can be cut as needed.
When selecting a leaf chain for a specific application, consider the minimum tensile strength of the chain. The minimum breaking strength must be high enough to protect the worker or machine, but must also be legal for the type of machine. Most manufacturers publish this minimum strength requirement. To make the most durable leaf chain, design engineers must consider the ISO4347 standard when choosing the right leaf chain. Leaf chain manufacturers tend to exceed international standards by about 20%.
chain

roller chain

Roller chains are made from a variety of materials. Some common materials include steel and stainless steel. The most suitable material depends on cost, environmental conditions, and horsepower transmission design. Chain manufacturers can optimize the material for the intended use. Depending on its size, spacing, and special construction techniques, it can be made lighter or heavier. This is an advantage for applications in noise-sensitive environments. Below are some examples of common uses for roller chains.
The wear of the components in a roller chain is an unavoidable part of its operation. The amount of elongation depends on factors such as lubrication, load, and the frequency of articulation between the pin and bushing. Manufacturing critical wear parts require careful attention to detail. Proper raw materials, manufacturing, and assembly are critical to product performance and longevity. If these components aren’t of high quality, they won’t last as long as the chain should.
The industry recommends measuring the wear elongation of the roller chain to determine when it needs to be replaced. Proper safety procedures must be used to measure chain tension. The tight span of the chain shall be measured by applying the measuring load specified by ANSI. A correctly measured roller chain is safe to use. For motorcycles, the chain is bigger and stronger. Often, toothed belts are replaced by shaft drives because they are less noisy and require less maintenance.
Tensile strength is the most commonly used measurement method for roller chains. This measurement represents the amount of load the chain can withstand before it breaks. Fatigue strength is another measure of durability. Fatigue strength measures how long a roller chain can withstand long-term use before failing. These two measurements are closely related and maybe the same or different. In addition to tensile strength, fatigue strength is a useful factor to consider when purchasing a chain.

China factory Duplex Short Pitch Precision Roller Chain (A series) Chain (DIN764)   CZPT bush chainChina factory Duplex Short Pitch Precision Roller Chain (A series) Chain (DIN764)   CZPT bush chain
editor by CX 2023-05-19

China high quality Duplex Short Pitch Precision Roller Chain (A series) Chain (DIN764) brush grubber chain

Product Description

XIHU (WEST LAKE) DIS.HUA Chain Group is the most professional manufacturer of power transmission in China, manufacturing roller chains, industry sprockets, motorcycle sprockets, casting sprockets, different type of couplings, pulleys, taper bushes, locking devices, gears, shafts, CNC precision parts and so on. We have passed ISO9001, ISO14001, TS16949 such quality and enviroment certification

We adopt good quality raw material and strict with DIN, ANSI, JIS standard ect, We have professional quality conrol team, complet equipment, advanaced technology. In 1999, Xihu (West Lake) Dis.hua obtained ISO9001 Certificate of Quality Assurance System, besides, the company also devotes itselt o environmental protection, In2002, it also obtained ISO14001 Certificate of Environment Management System.

Short pitch precision roller chains (A series)   15-240 simlex to eightlex includ normal short pitch precisson roller chains and heavy duty series roller chains

Short pitch precision roller chains (B series)   04B-72B simlex to triplex includ normal short pitch precisson roller chains and heavy duty series roller chains

SHORT PITCH PRECISSION ROLLER CHAINS (A SERIES)
Material: Alloy Steel
Surface Treatment: Shot Peening / Blacking / Blueing
Main Application: Idustry machinery

Product name  Duplex Short Pitch Precision Roller Chain (A series) Chain (DIN764)
Materials Available 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment Annealing, natural anodization, heat treatment,  polishing, nickel plating, chrome plating, znic plating,yellow passivation, gold passivation,  satin, Black surface painted etc.
Products Available sprockt chains, pulley, shafts(axles, spline shafts, dart shafts),gears (pinions, wheels gear rack) bearing, bearing seat,  bushing, coupling, lock assembly etc.
Processing Method CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC : Technicians self-check in production,final-check before package by  professional Quality inspector
Size Drawings
Package Wooden Case/Container and pallet, or as per customized specifications
Certificate ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Advantage Quality first Service superior , Advanced equipment,Experienced workers,Perfect testing equipment
Lead Time 15-25days samples. 30-45days offcial order

Usage: Transportation Chain
Material: Alloy/Carbon Steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Customization:
Available

|

Customized Request

chain

How to choose a roller chain for a conveyor

When choosing a roller chain for your conveyor, the easiest way is to refer to the horsepower and RPM charts. The horsepower and rpm of the small drive sprocket will determine the size and number of teeth of the chain. Conveyor chains are available in a variety of options, including moving products horizontally, vertically, or around a bend radius. When choosing a conveyor chain, consider the purpose of the chain. For example, if you’re delivering products to customers’ doorsteps, you might choose chains that can move products up and down a hallway or warehouse.

Double pitch

Double pitch roller chains are a popular way to drive agricultural equipment. It has twice the pitch of a standard roller chain and is ideal for light-duty drives. Extended pitch increases performance at lower speeds, but requires fewer components per foot than standard single-pitch chains. Compared to single-pitch roller chains, double-pitch chainplates are longer and are suitable for lighter loads. Read on to learn more about double pitch chains and how they can improve your operation.
The most common type of conveyor chain is double pitch. It is used in the auto parts industry, as well as in the precision machinery industry. It is made from the same components as the standard drive roller chain, except it has longer side plates. Double pitch chains are often used on slow-moving conveyors to reduce the stress placed on them. Industries that commonly use double pitch conveyor chains include airport equipment manufacturers, lumber mills, and fruit packing plants.
RS series roller chains are manufactured from high-quality stainless steel. It has excellent chemical and abrasion resistance and is available in a variety of cord lengths. RS sprockets have over 30 teeth. They contain all the necessary connection links for easy installation. PEER Chain offers double pitch roller chain attachments including pre-stretched chains, sprockets, and other attachments.
Double pitch roller chains have several advantages over standard chains. Double pitch chains have double the pitch, making them ideal for conveying applications such as conveyors. In addition to that, it also provides ANSI-compliant styles. These chains also have free connection links. When shopping for a double pitch roller chain, be sure to choose the one that fits your requirements and budget. They will last longer and save you money in the long run.
Double pitch roller chains to ANSI standards feature oversized rollers. These chains are best suited for applications where the product is mounted on top of the chain. They are ideal for agricultural applications where cotton is on top of the drum. Also, this type of chain is used in light-duty conveyors and agricultural applications. You can find double pitch roller chains in a variety of sizes and styles. And, as long as you know what you want, you’ll be happy with the results.

Self-lubricating

Self-lubricating roller chains eliminate the need for manual relubrication, providing long-lasting operation and reducing maintenance costs. These chains are particularly popular in industries such as the food and beverage industry, textiles, printing, and sawmills. They can also replace standard roller chain drives and conveyor chains. Manufactured to the specific standard ISO R606, these chains are ideal replacements for conventional chains. PC chains are particularly beneficial for food and beverage production and packaging applications due to their anti-corrosion properties.
Self-lubricating roller chains meet ISO, ASME/ANSI, and DIN standards. They are interchangeable with standard chains of the same size and shape and can be used in a variety of industrial applications. Self-lubricating chains have special oil-impregnated sleeves to reduce maintenance time. These chains are also suitable for applications where cleanliness is an issue.
Self-lubricating roller chains are manufactured with unique RS attachments. Rather than a traditional roller chain with an external lubricating ring, this type of chain retains the lubricant within its bushings. During operation, the application generates heat, heating the lubricant, which flows out of the pin and bushing area. Therefore, CZPT roller chains are ideal for certain food conveying applications.
In addition to self-lubricating roller chains, carbon steel, stainless steel or nickel-plated steel are also available. Self-lubricating roller chains are available in different sizes depending on the application, including 0.375″ wide profile straight-chain, extended pin chain, and four-link. In addition, these chains are also available in ANSI and BS chain specifications.

Accumulation

Whether you need to move large or small loads, accumulating roller chains are a viable solution. This chain conveyor is designed with low back pressure to transport large and bulky items with minimal noise. Free-running rollers within the chain help create a smooth build-up surface. These chains are available in a variety of options, including accumulating rollers of different pitches.
The accumulation and release roller chain 14 includes an upper part 15 and a lower part 16. The upper part 15 rests in the upper subspace 28, while the lower part 16 rests on the top side 20 of the profile. As the upper belt 15 rolls around the accumulation roller chain 14, it aligns with the lower chain 16 to form a continuous receiving space. This arrangement allows the accumulation roller chain 14 to rest on the top surface of the support profile 11.
A cumulative roller chain consists of many individual parts. Each section of the chain has an elongated cylindrical shape and is connected to each other by hinged joints. Each chain section also has an accumulation and release roller associated therewith. Each roller protrudes from the upper side 20 and the lower side 21 of the chain portion. The accumulation rollers are movable about an axis 22 extending transversely to the longitudinal axis of the chain.
A feature of the stacking and releasing roller chain is its simplicity. The conveyor has a profiled section that is permanently divided into two cross-sectional spaces. The bottom space is closed from all sides. The upper space accommodates the conveyor line. The contoured portion includes an opening that guides the bottom strap. A shunt can also be inserted between the two sections. The accumulating roller chain system is a convenient and versatile way to move bulky items.
There are many different types of accumulating roller chains. Some chains have offset rollers for optimal load distribution. Others have protection to prevent machine wear. Some run without lubricant, which is a safety advantage. In addition to protection, cumulative chains can also provide protection. The side bow version of the accumulation and release roller chain with offset accumulation and release rollers is designed for conveyor systems with very small bend radii.
chain

Without bushing

Bushless roller chains are the most common type of industrial chain. They are simple in design and require only regular maintenance. Regular maintenance includes lubricating, assessing wear, and replacing worn sprockets. For more information, please read the following information:
The outer chainplates and the inner chain plates are alternately arranged in pairs. The connecting pin extends through the hole in the inner link plate. The rollers thus positioned can be rotated on the connecting pins. Oil provided between the outer circumferential surfaces of each connecting pin serves to lubricate the chain. This system reduces noise and wears caused by collisions between inner chain plates and sprockets.
Compared to traditional roller chains, bushings roller chains have rollers around the bushing. These rollers are in rolling contact with the sprocket teeth, providing low friction and excellent wear resistance. To ensure smooth operation, bushings roller chains must be greased to prevent rust and keep the chain properly tensioned. Lubricated chains run smoother and last longer.
In a bushingless chain, the inner links are shaped like half bushings and ride on the rollers. The pins go through the outer plate and connect the inner links to the rollers. The outer plates overlap the inner links and open the pins. This system is also known as a heterochain. This type of chain is more common than traditional roller chains. If you are not sure which type of bushingless roller chain to choose, you may need to purchase an additional pair of inner chainplates.
Linerless roller chains may also include chain guides. In a bushingless roller chain, the outer and inner link plates conform to the surfaces of the guide rails. Thus, the large area of contact between the chain and the guide rail is eliminated, the friction loss is reduced, and the power transmission efficiency is improved. These properties make bushless roller chains more efficient and durable than traditional roller chains. It’s also less noisy. If you are looking for a chain with a lower noise level, a bushingless roller chain may be the right choice for you.

China high quality Duplex Short Pitch Precision Roller Chain (A series) Chain (DIN764)   brush grubber chainChina high quality Duplex Short Pitch Precision Roller Chain (A series) Chain (DIN764)   brush grubber chain
editor by CX 2023-05-18

China Standard Ca650 Agricultural Chain and Attachments duplex roller chain

Product Description

 

Item Name  Agricultural Roller Chains Model Standard
Row / Application Machinery Parts
Suiface Treament netural/sand-blasted/shot-peening Certification  ISO, ANSI, DIN, BS
Packing Packaged in boxes and wooden cases, or packaged in reels and then on pallets Port Any sea port or airport in china

 

Contact us

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle
Surface Treatment: Netural/Sand-Blasted/Shot-Peening
Structure: Roller Chain
Material: Carbon Steel
Type: Short Pitch Chain
Samples:
US$ 3.45/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

What is a drive chain?

A drive chain is a wheeled device that transmits power from one gear to another. The drive chain is usually an oval ring around a corner or worm gear. On the other hand, idler pulleys do not transmit power and are not used to move the chain. In some cases, drive chains can be used with idler pulleys to transport objects. This allows the drive chain to recover some power from the second gear.

conveyor chain

There are many types of conveyor chains to choose from. One type is a closed joint chain. It consists of the barrel and connecting rod, made from a single casting and heat-treated for high strength and durability. Conveyor chains typically have low running speeds and are typically made of malleable iron. Another type of chain is the power transmission chain, which is used to transmit mechanical power. They feature efficient lubrication and are stronger than conventional conveyor chains.
Roller chain pitches can range from half an inch to a third of an inch. They are available in steel and nickel-plated steel. They can be used with inline or staggered rollers and can be designed with different pitch levels. They can also have bushings between the chainplates or gaps between the teeth to increase their maximum spacing. When choosing a conveyor chain, remember to properly lubricate bearing surfaces to minimize power absorption, wear, and corrosion. Mineral oils of medium viscosity are suitable for normal operating temperatures. SAE 20W50 is suitable. Manufacturers also offer self-lubricating chains.
Conveyor chains are used in many industries. The automotive industry has traditionally used these chains for bulk transport. Their reliability and low cost make them an excellent choice for a variety of applications. CZPT Chains offers stainless steel and CZPT conveyor chains to meet your unique requirements. If you’re in the market for a new conveyor, don’t forget to shop around. CZPT Chain can help you find the perfect one.
The regular drive version consists of an ASME/ANSI roller chain wrapped around a driven sprocket. It can also be configured for variable rpm. The gear ratio between the two parts determines the reduction or increase in speed. In some cases, solution chains can be used. Roller chains are more efficient. Then, there are solutions for both cases. There are many types of conveyor chains to choose from.
Conveyor chain pitch also plays an important role in performance. The smaller the pitch of the chain, the faster it spins. On the other hand, a smaller pitch will require more teeth on the sprocket, which means more links will be engaged during the movement. This smaller articulation angle also produces smoother motion. It also reduces vibration. Therefore, CZPT Chains can be trusted for a long time.

roller chain

The performance of a drive chain depends on how well it is maintained and lubricated. Careful attention to detail is required when selecting a roller chain, which is one of the most important components in a drive chain. Its proper lubrication and assembly will significantly affect its wear life. Here are some important tips to follow when buying a roller chain:
The size of the drive chain should be selected according to the sprockets used. The large sprocket should have at least 25 teeth, and the small sprocket should have fewer teeth. The pitch of a drive chain is the contact angle between the chain and the sprocket. The smaller the sprocket, the smaller the contact angle of the two parts. Larger sprockets are better, but smaller sprockets must never have fewer teeth.
When purchasing a roller chain, be sure to consider the maximum speed of the small sprocket. This will determine how much lubrication you need. Different lubrication systems have different requirements. Manual lubrication limits how many feet per minute the drive chain can run, while oil bath lubrication can get you up to 1100 ft/min. The only way to maximize drive chain speed is to purchase a pump lubrication system.
Once you have the right length, you can determine if you need a new one. To do this you have to move the axis to measure the length. Once the length is determined, the drive chain should be removed from the sprocket and measured using the ANSI specified measuring load. You should also follow safety guidelines when measuring your chain. If you want to maximize the life of your drive chain, be sure to follow these tips.
Another important consideration is the type of environment you operate in. For applications that need to avoid rubbing steel rails, it is best to use a roller chain that can withstand a clean indoor environment. Although roller chains are generally more durable, they must be stored properly to avoid corrosion. If you care about the environment, consider opting for double chain. Its durability and low maintenance costs will make it a valuable investment in your business.

closed pivot

Closed-end pivot drive chains are used in a variety of applications. They are known for their durability, high strength, and long life. They are available in a variety of grades, including grade 400, grade 600, and grade 800 pivots, which can withstand the high forces required for certain applications. Enclosed pivot chains can be used to lift, pull, convey and transfer heavy loads.
Class 400 closed-end pivot chain features one-piece cast offset link construction. Steel pins connect each link and are prevented from rotating by head stops. This design allows the pin to connect inside the barrel without breaking. This type of chain is the most commonly used and has the highest durability. In addition to being extremely durable, it offers long-lasting performance and smooth operation.
Another closed-end pivot conveyor chain drive is called a power drive chain. These chains consist of barrels and links used to transmit rotation from one shaft to another. The barrels of the closed-end pivot chains are made of steel, which allows them to run easily on the sprockets. Block drive chains are used for low-speed applications, but they can be noisy when the chain is in contact with the sprockets.
The enclosed pivot drive chain has rollers on both ends to minimize wear. These chains are usually made of steel and can be used in areas where high-speed power transmission is required. They are also available in heavy-duty versions. Unlike other types of chains, steel pivot chains are designed for a variety of applications. They are suitable for heavy-duty applications and their open barrel design allows for minimal contact with the pins in the barrel and the root of the sprocket.
chain

Linear chain

CZPT is an important part of linear drive technology. This type of chain is capable of delivering real power in tight spaces. Typically, loads are moved by pulling or pushing. CZPT can perform both types of movements. They can push and pull additional loads. This type of chain can also be wound and stored in the magazine. It is a popular choice for small machine tools and many other uses.
Unlike traditional mechanical chains, CZPT uses a push-pull strategy to move heavy objects. It is a rigid locking design that prevents kinking and allows the chain to transmit force without bending. The CZPT is an excellent choice for moving large loads and is particularly versatile in power transmission. However, CZPT is more expensive than traditional drive chain options.
The service life of a linear chain depends on its design, material type and size. You may want to buy a good quality chain, but it’s not necessary in all cases. While superior quality can extend the life of the chain, it may not be necessary for low-speed drives or very light shock loads. If you’re not dealing with high-velocity shock loads, you probably don’t need features like oil reservoirs or bushing grooves.
The size of the drive sprocket can have a major impact on the overall life of the linear chain. It determines how fast the chain can go and how much horsepower it can produce. An 11-tooth chain will hit about half its rated speed, but only about 30 percent of its rated horsepower. You can extend the life of your linear chain by choosing a drive sprocket with a higher number of teeth. It is best to choose a drive sprocket with a high number of teeth, but make sure the number of teeth is even. This will ensure that your chain wear is evenly distributed.

China Standard Ca650 Agricultural Chain and Attachments   duplex roller chainChina Standard Ca650 Agricultural Chain and Attachments   duplex roller chain
editor by CX